Vol. 70 No. 8 (2026): Stroitel'nye i dorozhnye mashiny

Vol. 70 No. 8 (2026)

Table of Contents

CONSTRUCTION AND ARCHITECTURE

Study of the strength and durability of sand concrete with the use of secondary mineral raw materials

Artem A. Nadezhkin, Vladislav Yu. Kolyaskin, Daniil A. Solyanikov, Anton A. Filippov, Azat R. Samigullin

16-27 DOI: 10.25726/j4332-6697-7002-n
Abstract
Study of the influence of mix design and technological factors on the properties of self-compacting concrete mixtures

Soltan E. Appakov, Artem A. Frolov, Andrey A. Chumichkin, Roman A. Kuzmin, Makhmud M. Shibzukhov

28-41 DOI: 10.25726/t9732-1712-5421-o
Abstract
Improving the frost resistance of road concrete through complex modification of the cement stone structure

Sergey E. Khokhlunov, Vadim A. Slezkin, Elizaveta P. Tumaeva, Mikhail N. Kuznetsov, Yaroslav R. Kulikovskiy

42-54 DOI: 10.25726/v2528-8025-4242-t
Abstract
Development of modified cement composites with enhanced crack resistance for the manufacture of precast building products

Timur P. Syrysev, Vladislav A. Vakhrushev, Renat A. Ibragimov, Mihail I. Komarevcev, Nikita R. Tsvetkov

55-66 DOI: 10.25726/w8677-8840-9621-y
Abstract
Improving the production technology of multilayer building products with enhanced thermophysical and strength characteristics

Artem V. Lobanov, Leonid I. Elkin, Biymyrza A. Sulaimanov, Georgiy A. Kozyrev, Dmitriy D. Vorobyev

67-78 DOI: 10.25726/g0291-6740-4266-i
Abstract

MACHINES AND MECHANISMS

Study of the influence of truck mixer operating modes on the homogeneity and workability retention of concrete mixtures

Soltan E. Appakov, Artem A. Frolov, Andrey A. Chumichkin, Roman A. Kuzmin, Makhmud M. Shibzukhov

79-90 DOI: 10.25726/f0843-2887-5263-l
Abstract
Study of the wear processes of the working elements of crushing and screening equipment in the processing of construction waste

Andrei V. Reshetnikov, Vladislav L. Balakin, Yuliya S. Enyukova, Artem S. Verin, Vasilii K. Mitsenko

91-102 DOI: 10.25726/x7571-8913-9806-a
Abstract
Justification of rational parameters of machines for winter maintenance of motor roads in large cities

Yuri A. Kirilov, Ivan N. Levichkin, Mazan S. Burulov, Danil S. Konstantinov, Fyodor V. Dolzhikov

103-114 DOI: 10.25726/q2756-1019-7604-p
Abstract
Improving the reliability of asphalt pavers through prediction of the residual life of main units and assemblies

Tikhon A. Sidorov, Aleksandr D. Grudin, Filipp A. Mizev, Maksim A. Peniagin, Maksim P. Krasnikov

115-127 DOI: 10.25726/u5088-6746-4544-b
Abstract
Development of an automated stability control system for lifting machines at construction sites

Vladimir A. Vyatkin, Danis A. Safin, Oleg A. Sidorenko, Kirill S. Serov, Andrei A. Nichipurenko

128-139 DOI: 10.25726/n7976-5319-3990-i
Abstract

DESIGN AND MODELING

Modelling the interaction of road milling machine working elements with heterogeneous layers of asphalt concrete pavement

Andrei V. Reshetnikov, Vladislav L. Balakin, Yuliya S. Enyukova, Artem S. Verin, Vasilii K. Mitsenko

140-152 DOI: 10.25726/l8688-8044-3103-t
Abstract
Study of deformation characteristics of composite building materials under long-term service loading

Artem A. Nadezhkin, Vladislav Yu. Kolyaskin, Daniil A. Solyanikov, Anton A. Filippov, Azat R. Samigullin

153-164 DOI: 10.25726/x4316-9286-1495-w
Abstract
Improving bulldozer productivity through adaptive control of traction and working modes

Tikhon A. Sidorov, Aleksandr D. Grudin, Filipp A. Mizev, Maksim A. Peniagin, Maksim P. Krasnikov

165-178 DOI: 10.25726/c0997-6099-1954-k
Abstract
Algorithms and mathematical software for robotic systems

Elena V. Poezzhaeva, Vadim E. Karavaev, Michail I. Plotnikov, Nikita N. Kuchev, Maxim E. Kichigin, Ilya S. Pishchalnikov

179-188 DOI: 10.25726/o9443-3544-4701-l
Abstract
Reliability control of multichannel telemetry of a robotic manipulator based on an inter-channel consistency graph

Alexandr Y. Volkov

189-195 DOI: 10.25726/g2785-1491-8327-s
Abstract

APPLIED RESEARCH

Development of energy-efficient wall products based on lightweight concretes with improved thermal insulation properties

Timur P. Syrysev, Vladislav A. Vakhrushev, Renat A. Ibragimov, Mihail I. Komarevcev, Nikita R. Tsvetkov

196-208 DOI: 10.25726/j1656-1441-3932-k
Abstract
Improving the operational characteristics of reinforced concrete products through the use of dispersed reinforcement and active mineral additives

Sergey E. Khokhlunov, Vadim A. Slezkin, Elizaveta P. Tumaeva, Mikhail N. Kuznetsov, Yaroslav R. Kulikovskiy

209-222 DOI: 10.25726/y0443-0672-9417-g
Abstract
Application of recycled construction waste in the production of concrete products for transport infrastructure facilities

Vladimir A. Vyatkin, Danis A. Safin, Oleg A. Sidorenko, Kirill S. Serov, Andrei A. Nichipurenko

223-235 DOI: 10.25726/d4358-2400-3087-w
Abstract
Assessment of the efficiency of unmanned road machines in the construction and repair of transport infrastructure

Iurii A. Kirilov, Ivan N. Levichkin, Mazan S. Burulov, Danil S. Konstantinov, Fedor V. Dolzhikov

236-248 DOI: 10.25726/s2377-8259-4318-j
Abstract
Improvement of the maintenance technology for construction machinery with the use of digital diagnostics methods

Artem V. Lobanov, Leonid I. Elkin, Biymyrza A. Sulaimanov, Georgiy A. Kozyrev, Dmitriy D. Vorobyev

249-262 DOI: 10.25726/x3225-8755-3518-n
Abstract
Features of foundation reconstruction in the implementation of redevelopment projects

Artem V. Kostyrin, Maksim V. Aleksandrovskiy, Oleg V. Grekov, Sofiia A. Stavtseva, Vladislav S. Melnik

263-275 DOI: 10.25726/s3034-7615-7668-w
Abstract
Development of an automated dispatching complex for construction and road machines at distributed production sites

Victoria A. Arkhipova

276-290 DOI: 10.25726/o7434-9994-2796-x
Abstract
Automated control of asphalt concrete mix distribution considering road base parameters

Aleksey Yu. Bombitskiy

291-305 DOI: 10.25726/z9077-1426-2620-r
Abstract
Application of machine learning methods for automatic prediction of failures of construction and road machines

Nikita A. Gerasin

306-319 DOI: 10.25726/v9257-8266-0940-t
Abstract
Automation of maintenance of construction and road machinery fleets using digital twins

Sergey A. Efimov

320-333 DOI: 10.25726/v2073-0176-2616-w
Abstract
Improvement of automatic control of tractive modes of earthmoving and haulage machines during technological operations

Daniil A. Zhulanov

334-348 DOI: 10.25726/b8913-8460-5716-w
Abstract
Automation of motor grader working body positioning in the formation of the design profile of a highway

Igor D. Kobelev

349-363 DOI: 10.25726/t5304-7445-9312-a
Abstract
Development of an automated monitoring system for operational parameters of mobile crushing and screening plants

Georgiy V. Markov

364-377 DOI: 10.25726/x0446-6842-3556-i
Abstract
Intelligent system for automatic selection of front loader operating modes depending on material characteristics

Mikhail V. Mityakin

378-391 DOI: 10.25726/e9726-6778-4289-h
Abstract
Development of a digital system for automatic monitoring of the productivity and energy efficiency of road construction machinery

Ulyana E. Pyzhikova

392-406 DOI: 10.25726/e3292-9452-7526-q
Abstract
Improving the safety of construction machinery based on automated recognition of obstacles and hazardous zones

Lev D. Rykalov

407-421 DOI: 10.25726/u3361-3178-2705-p
Abstract
Учитель отрасли строительного и дорожного машиностроения

G.V. Kustarev, R.G. Danilov

422-439
Abstract
Памяти Леонида Андреевича Хмары

440-441
Abstract