Study of the dynamics of wear of road construction machinery components during operation in extreme climatic conditions of the Far North
How to cite
Abstract
The study is devoted to the analysis of the dynamics of wear of the main components of road construction equipment in the extremely low temperatures of the Far North. The operation of machinery at temperatures up to -60 ° C is associated with the intensification of wear processes that require special approaches to the design, selection of materials and operation of equipment. The work carried out a comprehensive assessment of the impact of low-temperature effects on hydraulic systems, transmission, chassis and engines of vehicles of the road construction complex. The research methodology was based on a comparative analysis of wear indicators under different temperature conditions using methods of tribotechnical diagnostics and mathematical modeling of climatic influences. Field tests were carried out at landfills using modern diagnostic equipment and non-destructive testing methods. The results of the study revealed patterns of accelerated degradation of metal surfaces at temperatures below -45°C, and wear intensity coefficients for various components of the equipment were numerically determined. A correlation has been established between the ambient temperature and the rate of abrasive wear in friction units, and a mechanism for low-temperature brittleness of metal structures has been proposed. A scientific basis has been formed for the development of modified structures and materials to ensure reliable operation of equipment in extreme conditions. The practical significance of the work lies in the creation of recommendations for optimizing maintenance modes of road construction equipment in the Far North, aimed at increasing the operational life of equipment and reducing economic losses from downtime.
Keywords
References
Аносов М.С. Оценка структурной устойчивости металлических материалов и выявление механизмов их разрушения при низких температурах: дисс. … канд. тех. наук. Нижний Новгород, 2018. 193 с.
Баловнев В.И., Глаголев С.Н., Данилов Р.Г. Машины для земляных работ: конструкция, расчет, потребительские свойства. Белгород: Изд-во БГТУ, 2021. 385 с.
Белецкий Б.Ф., Булгакова И.Г. Строительные машины и оборудование. СПб.: Лань, 2012. 608 с.
ГОСТ 15150-69. Машины, приборы и другие технические изделия. Исполнения для различных климатических районов. Категории, условия эксплуатации, хранения и транспортирования в части воздействия климатических факторов внешней среды. М.: Стандартинформ, 2021. 58 с.
Мещерякова А.Р., Цуканов И.Ю. Влияние смятия в зоне сварных стыков рельсового пути на контактное взаимодействие в системе «колесо-рельс» // Трение и износ. 2022. Т. 43. № 2. С. 192-201.
Олейник П.П. Выбор строительной техники для пионерного освоения территорий в экстремальных условиях // Промышленное и гражданское строительство. 2022. № 12. С. 29-36.
Перевозка 24. Новинки для Севера: рынок экскаваторов // perevozka24.ru. 2022. https://perevozka24.ru/pages/novinki-dlya-severa-rynok-ekskavatorov/
Порицкий Р.З., Давыдов В.А. Особенности изысканий и проектирования автомобильных дорог в районах вечной мерзлоты. Омск: СибАДИ, 2020. 215 с.
Тарасов П.И. Обоснование путей развития транспортных средств для освоения северных территорий России // Мат. XII Межд. науч.-практ. конф. «Проблемы карьерного транспорта» (1-4 октября 2013 г., Екатеринбург). Екатеринбург: УрО РАН, 2013. С. 75-86.
Торская Е.В., Степанов Ф.И., Лушников Н.А. Моделирование деформации дорожных одежд подвижной нагрузкой // Трение и износ. 2021. Т. 42, № 2. С. 153-161.
Федоров В.К. Оптимальная стратегия технической эксплуатации строительных машин // Строительные и дорожные машины. 2001. № 9. С. 26-29.
Хибухин В.П. Математические методы планирования и управления строительством. Л.: Стройиздат, Ленингр. отд., 2020. 175 с.
Чооду О.А. СДМ в климатических условиях Республики Тыва // Автомобильные дороги, транспорт и экология: Сборник научно-практических трудов группы предприятий «ДОРСЕРВИС». СПб.: ООО «Издательство ДНК», 2016. С. 112-124.
Шкалей И.В., Муравьева Т.И., Мезрин А.М., Торская Е.В. Связь морфологии и химического состава поверхности легированных алмазоподобных покрытий с коэффициентом трения // Трение и износ. 2021. Т. 42. № 6. С. 670-680.
Savenko V.I. Comparative Analysis of the Temporal Evolution of phenomenological and microstructural characteristics of a tribomaterial during cyclic rolling // Journal of friction and wear. 2022. Vol. 43. № 1. рр. 98-112.