MACHINES AND MECHANISMS

Design and tribological analysis of seals in static detachable joints of machines

Authors

  • Vladislav V. Burenin Moscow Automobile and Road Construction State Technical University (MADI), 125319, Moscow, Leningradsky Prospekt, 64
  • Alexander V. Katarzhin https://orcid.org/0009-0002-7560-2543 Moscow Automobile and Road Construction State Technical University (MADI), 125319, Moscow, Leningradsky Prospekt, 64
  • Andrey A. Kotov https://orcid.org/0000-0002-6855-0688 Moscow Automobile and Road Construction State Technical University (MADI), 125319, Moscow, Leningradsky Prospekt, 64

How to cite

GOST Burenin V. V., Katarzhin A. V., Kotov A. A. Design and tribological analysis of seals in static detachable joints of machines // STROITEL'NYE I DOROZHNYE MASHINY. 2026. Vol. 70. No. 10. P. 58-72. DOI: 10.25726/h7802-4682-2631-b
APA Burenin, V. V., Katarzhin, A. V. & Kotov, A. A. (2026). Design and tribological analysis of seals in static detachable joints of machines. STROITEL'NYE I DOROZHNYE MASHINY, 70(10), 58-72. https://doi.org/10.25726/h7802-4682-2631-b

Abstract

This paper examines design approaches to maintaining the sealing performance of static detachable joints in machines under changing assembly preload, temperature exposure, and cyclic microslip. The objective is to establish how seal design and interfacial contact conditions relate to the dominant leakage and damage mechanisms. A comparative design and tribological analysis was performed for established elastomeric, graphite-based, and metallic sealing configurations. The study considers reinforcement, separation of elastic and protective functions, graphite edge protection, compression stops, load redistribution, and accommodation of limited relative displacement. It is shown that establishing initial contact does not necessarily ensure sufficient residual contact pressure after unloading or cyclic loading. For expanded-graphite gaskets, delamination, local material transfer, and the development of interconnected microgaps are identified as additional potential degradation mechanisms. The applicability of the gasket parameters specified in EN 13555:2021 and the calculation framework of EN 1591-1:2024 is distinguished from the requirements for hydraulic flanged joints used in machinery. A set of indicators is proposed for further assessment, including leakage, residual compression, contact stress, microslip, and surface damage. It is shown that the choice of seal design for static detachable joints of construction and road machines is determined by the identified failure mechanism and an experimentally verifiable parameter. These findings constitute a comparative analytical assessment, rather than experimentally established service-life values or sealing classes.

Keywords

static detachable joint sealing performance contact pressure fretting wear elastomeric seal expanded graphite compression stop

Funding

The authors did not declare any external funding for this research.

References

Avdeev V.V., Ionov S.G., Levin V.N. Method for manufacturing a flat gasket and gasket. Patent RU 2271487 C1, IPC F16J 15/12; applicant ZAO “UNIKHIMTEK”. Filed 16.06.2004; published 10.03.2006. Bull. 2006. no. 9. 8 pp.

Bogdan O.P., Blinova A.V., Denisov L.A. Experimental assessment of the possibility of detecting through-defects in blanks made of thermally expanded graphite by the acoustic method // Bulletin of Kalashnikov Izhevsk State Technical University. 2024. vol. 27. no. 2. pp. 97-105.

Bozhko G.V. Detachable sealed joints // Transactions of the Tambov State Technical University. 2010. vol. 16. no. 2. pp. 404-420.

Burenin V.V. New contact seals for fixed detachable joints of hydraulically operated machine tools // STIN. 2011. no. 2. pp. 27-33.

Burenin V. Sealing fixed detachable joints in machines, petrochemical and chemical industries // Business Journal Neftegaz.RU. 2013. no. 9 (21). pp. 52-56.

Verezhansky V.Yu., Kuzhel M.P., Fedorov V.D., Shebalov A.V. Sealing element. Patent RU 2213282 C2, IPC F16J 15/02; applicant RFNC–VNIIEF. Filed 27.08.2001; published 27.09.2003. Bull. no. 27. 4 pp.

Voronin V.P., Ulanov G.A., Remezov A.N. Flanged joint. Patent RU 2191939 C1, IPC F16J 15/02; applicant ZAO “Unikhimtek”. Filed 17.09.2001; published 27.10.2002. Bull. no. 10. 5 pp.

Elagina O.Yu., Dubinova O.B. Modeling the wear process of a sealing gasket in a flanged joint under fretting // Russian Engineering Research. 2024. vol. 103. no. 3. pp. 217-221.

Epishov A.P., Kleptsov I.P. Gasket for sealing a flanged joint. Patent RU 2282083 C2, IPC F16J 15/12; applicant LLC “Ilma”. Filed 07.06.2004; published 20.08.2006. Bull. no. 23. 8 pp.

Izvolensky E.V., Samoylov A.R. Sealing a detachable joint. Patent RU 2218494 C2, IPC F16J 15/02; applicant FSUE “M.V. Khrunichev State Research and Production Space Center”. Filed 30.05.2001; published 10.12.2003. Bull. no. 34. 4 pp.

Karagodin V.I., Burenin V.V., Polyansky V.I. Designs of contact seals for fixed detachable joints of rocket equipment units // MADI Bulletin. 2012. no. 2 (29). pp. 21-26.

Kononenko A.S., Notfullin I.F. Theoretical rationale for the use of sealing elements to ensure the tightness of flanged joints // Fundamental and Applied Problems of Engineering and Technology. 2025. no. 1 (369). pp. 40-45.

Kotlyar S.M., Safonov V.G., Safonov E.V. Method for producing reinforced gasket material. Patent RU 2183776 C2, IPC F16J 15/12; applicant OAO “VATI”. Filed 26.09.2000; published 20.06.2002. Bulletin 2002. no. 20. 6 pp.

Mironova L.I., Kolesnik O.A., Bosak D.B. Numerical modeling of contact interaction of profiled metal seals in flange connections of aviation equipment // RUDN Journal of Engineering Research. Series: Engineering Research. 2024. vol. 25. no. 4. pp. 368-379.

Safonov E.V., Kotlyar S.M., Safonov V.G., Sedov M.P. Method for producing reinforced multilayer gasket material. Patent RU 2215922 C2, IPC F16J 15/12; applicant OAO “VATI”. Filed 11.09.2000; published 10.11.2003. Bulletin 2003. no. 21. 8 pp.

Timofeev E.K., Godenko A.E., Tarasova I.A. Determination of the optimal geometric parameters of a metal seal for a tubing hanger // Modeling, Optimization and Information Technology. 2025. vol. 13. no. 1. pp. 1-10.

Li F., Xu L., Dong S., Wang D., Dong X., Pan B., Liu Q. Multi-scale contact characteristics and leakage prediction of flange seal based on fractal geometry // Nuclear Engineering and Design. 2025a. Vol. 432. Art. 113835.

Li Y., Li L., Tang Y., Zhang J., Xiao H. Fretting wear modeling of bolted joint interface with microscopic roughness using the 1D microslip friction model and equivalent thin layer // Mechanics Based Design of Structures and Machines. 2025b. Vol. 53. no. 6. pp. 4786-4811.

Staf M., Šnajdárek L., Hlinčík T. A gasket design suitable for helium circuits of generation IV gas-cooled reactors // Annals of Nuclear Energy. 2024. Vol. 200. Art. 110383.

Wang L.-N., Sun L.-C., Ren G.-H., Shi J.-J., Qi J.-D. Performance evaluation of flange seal systems in forming line // Vacuum. 2025. Vol. 233. Art. 113967.

Wang Y., Fan J., Jiang H., Wang S. Study on the sealing performance of high-pressure flanges by a magnetic measurement method of bolt axial force // Measurement. 2024. Vol. 234. Art. 114853.

Issue

Section

MACHINES AND MECHANISMS

Metrics

6 views
0 downloads
Want to publish with us?
Submit an article