<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="https://iereview.ru/lib/pkp/xml/oai2.xsl" ?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
		http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
	<responseDate>2026-08-23T22:35:44Z</responseDate>
	<request identifier="oai:ojs2.iereview.ru:article/363" metadataPrefix="jats" verb="GetRecord">https://iereview.ru/index.php/IE/oai</request>
	<GetRecord>
		<record>
			<header>
				<identifier>oai:ojs2.iereview.ru:article/363</identifier>
				<datestamp>2026-08-11T21:15:24Z</datestamp>
				<setSpec>IE:MAMC</setSpec>
			</header>
			<metadata>
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="" dtd-version="1.4" xsi:noNamespaceSchemaLocation="https://jats.nlm.nih.gov/archiving/1.4/xsd/JATS-archivearticle1.xsd" xml:lang="ru">
			<front>
			<journal-meta>
				<journal-id journal-id-type="publisher">IE</journal-id><journal-id journal-id-type="ojs">IE</journal-id>
				<journal-title-group>
			<journal-title xml:lang="ru">СТРОИТЕЛЬНЫЕ И ДОРОЖНЫЕ МАШИНЫ</journal-title><trans-title-group xml:lang="en"><trans-title>STROITEL'NYE I DOROZHNYE MASHINY</trans-title></trans-title-group>
</journal-title-group>			<issn pub-type="ppub">0039-2391</issn>			<publisher><publisher-name>ИП Подколзин М.М.</publisher-name></publisher>
			<self-uri xlink:href="https://iereview.ru/index.php/IE"/>
		</journal-meta>
		<article-meta>
			<article-id pub-id-type="publisher-id">363</article-id>
			<article-id pub-id-type="other" specific-use="edn">CPHVJA</article-id>
			<article-id pub-id-type="doi">10.25726/u5088-6746-4544-b</article-id>
			<article-categories><subj-group subj-group-type="heading" xml:lang="en"><subject>MACHINES AND MECHANISMS</subject></subj-group><subj-group subj-group-type="heading" xml:lang="ru"><subject>МАШИНЫ И МЕХАНИЗМЫ</subject></subj-group></article-categories>
			<title-group><article-title xml:lang="ru">Повышение надежности асфальтоукладчиков путем прогнозирования остаточного ресурса основных узлов и агрегатов</article-title><trans-title-group xml:lang="en"><trans-title>Improving the reliability of asphalt pavers through prediction of the residual life of main units and assemblies</trans-title></trans-title-group></title-group>
			<contrib-group content-type="author">
				<contrib contrib-type="author">
					<name-alternatives>
						<name name-style="western" specific-use="primary" xml:lang="ru">
							<surname>Сидоров</surname>
							<given-names>Тихон Андреевич</given-names>
						</name>
						<name name-style="western" xml:lang="en">
							<surname>Sidorov</surname>
							<given-names>Tikhon A.</given-names>
						</name>
					</name-alternatives>
					<xref ref-type="aff" rid="aff-1"/>
					<email>TihSid@yandex.ru</email>
				</contrib>
				<contrib contrib-type="author">
					<name-alternatives>
						<name name-style="western" specific-use="primary" xml:lang="ru">
							<surname>Грудин</surname>
							<given-names>Александр Дмитриевич</given-names>
						</name>
						<name name-style="western" xml:lang="en">
							<surname>Grudin</surname>
							<given-names>Aleksandr D.</given-names>
						</name>
					</name-alternatives>
					<xref ref-type="aff" rid="aff-1"/>
					<email>grudindmitr@gmail.com</email>
				</contrib>
				<contrib contrib-type="author">
					<name-alternatives>
						<name name-style="western" specific-use="primary" xml:lang="ru">
							<surname>Мизёв</surname>
							<given-names>Филипп Андреевич</given-names>
						</name>
						<name name-style="western" xml:lang="en">
							<surname>Mizev</surname>
							<given-names>Filipp A.</given-names>
						</name>
					</name-alternatives>
					<xref ref-type="aff" rid="aff-1"/>
					<email>mizev-fa@mail.ru</email>
				</contrib>
				<contrib contrib-type="author">
					<name-alternatives>
						<name name-style="western" specific-use="primary" xml:lang="ru">
							<surname>Пенягин</surname>
							<given-names>Максим Алексеевич</given-names>
						</name>
						<name name-style="western" xml:lang="en">
							<surname>Peniagin</surname>
							<given-names>Maksim A.</given-names>
						</name>
					</name-alternatives>
					<xref ref-type="aff" rid="aff-1"/>
					<email>maks5518@yandex.ru</email>
				</contrib>
				<contrib contrib-type="author">
					<name-alternatives>
						<name name-style="western" specific-use="primary" xml:lang="ru">
							<surname>Красников</surname>
							<given-names>Максим Павлович</given-names>
						</name>
						<name name-style="western" xml:lang="en">
							<surname>Krasnikov</surname>
							<given-names>Maksim P.</given-names>
						</name>
					</name-alternatives>
					<xref ref-type="aff" rid="aff-1"/>
					<email>maximkrasnikov171204@gmail.com</email>
				</contrib>
			</contrib-group>
			<aff-alternatives id="aff-1">
				<aff xml:lang="ru"><institution content-type="orgname">Национальный исследовательский Московский государственный строительный университет, 129337, Россия, г. Москва, Ярославское шоссе, д. 26</institution></aff>
				<aff xml:lang="en"><institution content-type="orgname">National Research Moscow State University of Civil Engineering, 129337, Moscow, Yaroslavskoye Shosse, 26, Russia</institution></aff>
			</aff-alternatives>
			<pub-date date-type="collection"><year>2026</year></pub-date><pub-date date-type="pub" publication-format="epub">
				<day>30</day>
				<month>08</month>
				<year>2026</year>
			</pub-date>
			<volume seq="9">70</volume>
			<issue>8</issue>
				<issue-id>30</issue-id><issue-title xml:lang="ru">Строительные и дорожные машины</issue-title><issue-title xml:lang="en">Stroitel'nye i dorozhnye mashiny</issue-title><fpage>115</fpage>
				<lpage>127</lpage>
			<history>
				<date date-type="received" iso-8601-date="2026-05-03">
					<day>03</day>
					<month>05</month>
					<year>2026</year>
				</date>
			</history>
			<permissions>
				<copyright-statement xml:lang="ru">© 2026 СТРОИТЕЛЬНЫЕ И ДОРОЖНЫЕ МАШИНЫ. Все права защищены.</copyright-statement>
				<copyright-statement xml:lang="en">© 2026 STROITEL'NYE I DOROZHNYE MASHINY. All rights reserved.</copyright-statement>
				<copyright-year>2026</copyright-year>
				<copyright-holder xml:lang="ru">СТРОИТЕЛЬНЫЕ И ДОРОЖНЫЕ МАШИНЫ</copyright-holder>
				<copyright-holder xml:lang="en">STROITEL'NYE I DOROZHNYE MASHINY</copyright-holder>
				<license license-type="open-access" specific-use="metadata" xlink:href="https://creativecommons.org/publicdomain/zero/1.0/" xml:lang="ru">
					<license-p>Метаданные настоящей записи распространяются на условиях Creative Commons CC0 1.0 (передача в общественное достояние).</license-p>
				</license>
				<license license-type="open-access" specific-use="metadata" xlink:href="https://creativecommons.org/publicdomain/zero/1.0/" xml:lang="en">
					<license-p>The metadata of this record are distributed under the Creative Commons CC0 1.0 Universal Public Domain Dedication.</license-p>
				</license>
			</permissions>
			
			<self-uri xlink:href="https://iereview.ru/index.php/IE/article/view/363"/>
			
			
			
			<abstract xml:lang="ru"><p>Ремонтные стратегии, построенные на календарной периодичности и фиксированной наработке, плохо согласуются с фактическим темпом деградации узлов асфальтоукладчика: разброс ресурса гидропривода при одинаковой наработке достигает величин, при которых плановая замена оказывается либо преждевременной, либо запоздалой. Цель работы – построение расчётной схемы прогнозирования остаточного ресурса основных узлов асфальтоукладчика по диагностическим признакам и оценка достижимого уровня готовности парка. Применены двухпараметрическое распределение Вейбулла, гамма-процесс деградации и гибридная схема, соединяющая стохастическую модель накопления повреждения с градиентным бустингом на векторе диагностических признаков; расчёт выполнен на авторской модели парка из двенадцати гусеничных укладчиков с наработкой за сезоны 2021-2026 годов. Установлено, что гидропривод даёт 34,2% отказов и 36,8% суммарного простоя при наработке на отказ 413 мото-ч, а решающий вклад в точность прогноза вносят загрязнённость рабочей жидкости и объёмный КПД насоса хода – суммарно 0,58 в шкале важности признаков. Гибридная схема снижает среднюю абсолютную ошибку прогноза остаточного ресурса с 218 до 87 мото-ч и поднимает коэффициент технической готовности парка с 0,782 до 0,871 при горизонте прогноза 150 мото-ч; расширение горизонта до 300 мото-ч результат ухудшает. Предел прогнозной стратегии задаётся скоростью накопления диагностической информации, и усложнение вычислительной схемы этот предел не смещает.</p></abstract><trans-abstract xml:lang="en"><p>Maintenance strategies based on calendar intervals and fixed operating time correspond poorly to the actual degradation rate of asphalt paver units: the scatter of the service life of the hydraulic drive at equal operating time reaches values at which scheduled replacement turns out to be premature or belated. The aim of the study is to construct a computational scheme for predicting the residual life of the main paver units from diagnostic features and to estimate the attainable level of fleet availability. A two-parameter Weibull distribution, a gamma degradation process and a hybrid scheme with gradient boosting over the diagnostic feature vector are applied to an author's model of a fleet of twelve tracked pavers over the 2021-2026 seasons. The hydraulic drive accounts for 34,2% of failures and 36,8% of total downtime at a mean operating time between failures of 413 engine hours, and the decisive contribution to forecast accuracy comes from working fluid contamination and the volumetric efficiency of the travel pump, jointly 0,58 on the feature importance scale. The hybrid scheme reduces the mean absolute error of the forecast from 218 to 87 engine hours and raises the fleet technical availability factor from 0,782 to 0,871 at a horizon of 150 engine hours; extending the horizon to 300 engine hours degrades the result. The limit of the predictive strategy is therefore set by the rate of diagnostic information accumulation, and increasing the complexity of the computational scheme does not shift it.</p></trans-abstract><kwd-group xml:lang="en"><title>Keywords</title><kwd>asphalt paver</kwd><kwd>residual life</kwd><kwd>technical condition prognostics</kwd><kwd>hydraulic drive</kwd><kwd>technical availability factor</kwd><kwd>gamma degradation process</kwd><kwd>condition-based maintenance</kwd></kwd-group><kwd-group xml:lang="ru"><title>Ключевые слова</title><kwd>асфальтоукладчик</kwd><kwd>остаточный ресурс</kwd><kwd>прогнозирование технического состояния</kwd><kwd>гидропривод</kwd><kwd>коэффициент технической готовности</kwd><kwd>гамма-процесс деградации</kwd><kwd>обслуживание по фактическому состоянию</kwd></kwd-group><funding-group>
				<funding-statement xml:lang="ru">Исследование выполнено без внешнего финансирования.</funding-statement>
				<funding-statement xml:lang="en">The study was conducted without external funding.</funding-statement>
			</funding-group>
			<counts><page-count count="13"/></counts>
			<custom-meta-group>
				<custom-meta>
					<meta-name>metadata-license</meta-name>
					<meta-value><ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/publicdomain/zero/1.0/">CC0 1.0</ext-link></meta-value>
				</custom-meta>
			<custom-meta><meta-name>issue-cover</meta-name><meta-value><inline-graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="https://iereview.ru/public/journals/1/cover_issue_30_ru_RU.png"/></meta-value></custom-meta></custom-meta-group>
		</article-meta>
	</front>
	<back>
		<ref-list xml:lang="ru">
			<title>Список литературы</title>
			<ref id="R1"><mixed-citation>Аноприенко А.К., Коноплин А.Ю. Перспективы применения клееклепаной технологии при создании и ремонте дорожно-строительных машин в условиях резких термических колебаний и низких температур // Проблемы машиностроения и надежности машин. 2021. № 6. С. 68-72.</mixed-citation></ref>
			<ref id="R2"><mixed-citation>Гареев А.М., Прокофьев А.Б., Рыжкова Ю.П., Стадник Д.М. Прогнозирование остаточного срока службы гидравлического насоса с применением методов машинного обучения // Динамика и виброакустика. 2021. Т. 7. № 3. С. 13-21.</mixed-citation></ref>
			<ref id="R3"><mixed-citation>Дорохина Е.С., Голдовская А.А., Гирник А.С. Прогнозирование остаточного ресурса асинхронных тяговых электродвигателей // Проблемы машиностроения и надежности машин. 2019. № 4. С. 63-67.</mixed-citation></ref>
			<ref id="R4"><mixed-citation>Загарин Д.А., Плавельский А.Е., Плавельский Е.П., Скель В.И. О виртуальных и натурных испытаниях строительных, дорожных, горных машин и спецавтотранспортных средств // Законодательная и прикладная метрология. 2024. № 5. С. 25-29.</mixed-citation></ref>
			<ref id="R5"><mixed-citation>Зорин В.А., Нгуен Чонг Минь. Прогнозирование остаточного ресурса гидромоторов строительных машин по результатам имитационного моделирования // Ремонт. Восстановление. Модернизация. 2023. № 3. С. 15-19.</mixed-citation></ref>
			<ref id="R6"><mixed-citation>Мухин В.В. Анализ дефектов и способов ремонта элементов дорожно-строительных машин, работающих в контакте с влажными средами // Ремонт. Восстановление. Модернизация. 2021. № 3. С. 22-27.</mixed-citation></ref>
			<ref id="R7"><mixed-citation>Пугин К.Г., Шаякбаров И.Э. Обеспечение надёжности гидравлических систем строительно-дорожных машин // Тракторы и сельхозмашины. 2025. Т. 92. № 2. С. 176-184.</mixed-citation></ref>
			<ref id="R8"><mixed-citation>Рузанкин П.А. Особенности технологий ремонта основных элементов гидравлической системы дорожно-строительных машин с применением полимерных композиционных материалов // Ремонт. Восстановление. Модернизация. 2021. № 12. С. 9-12.</mixed-citation></ref>
			<ref id="R9"><mixed-citation>Al-Refaie A., Al-Atrash M., Lepkova N. Prediction of the remaining useful life of a milling machine using machine learning // MethodsX. 2025. Vol. 14. Art. 103195.</mixed-citation></ref>
			<ref id="R10"><mixed-citation>Chen C., Lu N., Jiang B., Wang C. A risk-averse remaining useful life estimation for predictive maintenance // IEEE/CAA Journal of Automatica Sinica. 2021a. Vol. 8. № 2. pp. 412-422.</mixed-citation></ref>
			<ref id="R11"><mixed-citation>Chen Z., Wu M., Zhao R., Guretno F., Yan R., Li X. Machine remaining useful life prediction via an attention-based deep learning approach // IEEE Transactions on Industrial Electronics. 2021b. Vol. 68. № 3. pp. 2521-2531.</mixed-citation></ref>
			<ref id="R12"><mixed-citation>Dalzochio J., Kunst R., Barbosa J.L.V., Vianna H.D., de Oliveira Ramos G., Pignaton E., Binotto A., Favilla J. ELFpm: a machine learning framework for industrial machines prediction of remaining useful life // Neurocomputing. 2022. Vol. 512. pp. 420-442.</mixed-citation></ref>
			<ref id="R13"><mixed-citation>Gareev A.M., Shakhmatov E.V., Prokofev A.B., Stadnik D.M. Machine learning method for predicting remaining useful life of hydraulic equipment // Journal of Machinery Manufacture and Reliability. 2022. Vol. 51. № 3. pp. 253-260.</mixed-citation></ref>
			<ref id="R14"><mixed-citation>Taşcı B., Omar A., Ayvaz S. Remaining useful lifetime prediction for predictive maintenance in manufacturing // Computers and Industrial Engineering. 2023. Vol. 184. Art. 109566.</mixed-citation></ref>
			<ref id="R15"><mixed-citation>Zhang Y., Fang L., Qi Z., Deng H. A review of remaining useful life prediction approaches for mechanical equipment // IEEE Sensors Journal. 2023. Vol. 23. № 24. pp. 29991-30006.</mixed-citation></ref>
		</ref-list>
		<ref-list xml:lang="en">
			<title>References</title>
			<ref id="RE1"><mixed-citation>Anoprienko A.K., Konoplin A.Yu. Prospects for the use of adhesive-riveted technology in the manufacture and repair of road-building machines under sharp thermal fluctuations and low temperatures // Journal of Machinery Manufacture and Reliability. 2021. № 6. pp. 68-72.</mixed-citation></ref>
			<ref id="RE2"><mixed-citation>Gareev A.M., Prokofev A.B., Ryzhkova Yu.P., Stadnik D.M. Prediction of the remaining service life of a hydraulic pump using machine learning methods // Dynamics and Vibroacoustics. 2021. Vol. 7. № 3. pp. 13-21.</mixed-citation></ref>
			<ref id="RE3"><mixed-citation>Dorokhina E.S., Goldovskaya A.A., Girnik A.S. Prediction of the residual life of asynchronous traction electric motors // Journal of Machinery Manufacture and Reliability. 2019. № 4. pp. 63-67.</mixed-citation></ref>
			<ref id="RE4"><mixed-citation>Zagarin D.A., Plavelsky A.E., Plavelsky E.P., Skel V.I. On virtual and full-scale testing of construction, road, mining machines and special vehicles // Legislative and Applied Metrology. 2024. № 5. pp. 25-29.</mixed-citation></ref>
			<ref id="RE5"><mixed-citation>Zorin V.A., Nguyen Trong Minh. Prediction of the residual life of hydraulic motors of construction machines based on simulation modelling results // Repair. Reconditioning. Modernization. 2023. № 3. pp. 15-19.</mixed-citation></ref>
			<ref id="RE6"><mixed-citation>Mukhin V.V. Analysis of defects and repair methods for elements of road-building machines operating in contact with humid environments // Repair. Reconditioning. Modernization. 2021. № 3. pp. 22-27.</mixed-citation></ref>
			<ref id="RE7"><mixed-citation>Pugin K.G., Shayakbarov I.E. Ensuring the reliability of hydraulic systems of construction and road machines // Tractors and Agricultural Machinery. 2025. Vol. 92. № 2. pp. 176-184.</mixed-citation></ref>
			<ref id="RE8"><mixed-citation>Ruzankin P.A. Features of repair technologies for the main elements of the hydraulic system of road-building machines using polymer composite materials // Repair. Reconditioning. Modernization. 2021. № 12. pp. 9-12.</mixed-citation></ref>
			<ref id="RE9"><mixed-citation>Al-Refaie A., Al-Atrash M., Lepkova N. Prediction of the remaining useful life of a milling machine using machine learning // MethodsX. 2025. Vol. 14. Article 103195.</mixed-citation></ref>
			<ref id="RE10"><mixed-citation>Chen C., Lu N., Jiang B., Wang C. A risk-averse remaining useful life estimation for predictive maintenance // IEEE/CAA Journal of Automatica Sinica. 2021a. Vol. 8. № 2. pp. 412-422.</mixed-citation></ref>
			<ref id="RE11"><mixed-citation>Chen Z., Wu M., Zhao R., Guretno F., Yan R., Li X. Machine remaining useful life prediction via an attention-based deep learning approach // IEEE Transactions on Industrial Electronics. 2021b. Vol. 68. № 3. pp. 2521-2531.</mixed-citation></ref>
			<ref id="RE12"><mixed-citation>Dalzochio J., Kunst R., Barbosa J.L.V., Vianna H.D., de Oliveira Ramos G., Pignaton E., Binotto A., Favilla J. ELFpm: a machine learning framework for industrial machines prediction of remaining useful life // Neurocomputing. 2022. Vol. 512. pp. 420-442.</mixed-citation></ref>
			<ref id="RE13"><mixed-citation>Gareev A.M., Shakhmatov E.V., Prokofev A.B., Stadnik D.M. Machine learning method for predicting remaining useful life of hydraulic equipment // Journal of Machinery Manufacture and Reliability. 2022. Vol. 51. № 3. pp. 253-260.</mixed-citation></ref>
			<ref id="RE14"><mixed-citation>Taşcı B., Omar A., Ayvaz S. Remaining useful lifetime prediction for predictive maintenance in manufacturing // Computers and Industrial Engineering. 2023. Vol. 184. Article 109566.</mixed-citation></ref>
			<ref id="RE15"><mixed-citation>Zhang Y., Fang L., Qi Z., Deng H. A review of remaining useful life prediction approaches for mechanical equipment // IEEE Sensors Journal. 2023. Vol. 23. № 24. pp. 29991-30006.</mixed-citation></ref>
		</ref-list>
	</back>
</article>			</metadata>
		</record>
	</GetRecord>
</OAI-PMH>
